APC USV SMT3000RMI2UC SMARTUPS 3000VA LCD RM 2U 230V (Speditionsversand)

Manufacturer: APC

Kods SMT3000RMI2UC

Condition: Jauns

Vairāk informācijas

Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.Audible alarms Provides notification of changing utility power and UPS power conditionsAutomatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power.Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenanceBoost and Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).Cold-start capable Provides temporary battery power when the utility power is out.Disconnected battery notification Warns when a battery is not available to provide backup power.Energy meter Provides actual kilowatt hours of usage for energy conscious users.Frequency and voltage regulation Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.High online efficiency Reduces utility costs, generates less heat.Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replacedIntelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging.Intuitive LCD interface Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.LED Indicators Provide easy-to-read status of the unit and utility power conditions.Network manageable Provides remote power management of the UPS over the network.Outlet group control Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).Predictive failure notification. Provides early-warning fault analysis ensuring proactive component replacement.Predictive replace battery date Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.Sequenced network shutdown and reboot Customize network shutdown and reboot sequence of connected servers and UPSs.Serial connectivity Provides management of the UPS via a serial port.Single switched outlet group Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.SmartConnect Innovative, easy to use remote monitoring feature that provides automatic notifications, firmware updates, and advanced support services.StruxureWare Data Center Expert compatible Enables centralized management via StruxureWare Data Center Expert.Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature.USB connectivity Provides management of the UPS via a USB port (not available on all models).User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)Wide input voltage range Designed for harsh electrical environments to save battery life.

UPS topology	Line-Interactive
Output power capacity	3 kVA
Output power	2700 W
Waveform	Sine
Input operation voltage (min)	151 V
Input operation voltage (max)	302 V
Input frequency	50/60 Hz
Output operation voltage (min)	220 V
Output operation voltage (max)	240 V
Automatic Voltage Regulation (AVR)	Y
Surge energy rating	320 J
Hold time (min)	4 ms
Hold time (max)	8 ms
Efficiency	98.9%
Noise level	55 dB
Audible alarm(s)	Y
Auto-restart	Y
AC outlet types	C13 coupler, C19 coupler
Power plug	C20 coupler
AC outlets quantity	9 AC outlet(s)
Number of output IEC jumpers	3
USB port	Y
Serial interface	Y
Serial interface type	RJ-45
Ethernet LAN (RJ-45) ports	1
SmartSlot	Y
Battery technology	Sealed Lead Acid (VRLA)
Battery capacity	547 VAh
Typical backup time at full load	3.2 min
Typical backup time at half load	11.5 min
Battery life (max)	5 year(s)
Battery recharge time	3 h
Hot-swap battery	Y
Automatic battery test	Y
Cold start	Y
Form factor	Rackmount
Product colour	Black
Rack capacity	2U
Cable length	2 m
Display type	LCD
LED indicators	Status
Certification	CE, EAC, EN 60950, EN/IEC 62040-1, EN/IEC 62040-2, GS Mark, IRAM, RCM, VDE, WEEE, REACH, PEP, EOLI
Operating temperature (T-T)	0 - 40 °C
Storage temperature (T-T)	-15 - 45 °C
Operating relative humidity (H-H)	0 - 95%
Storage relative humidity (H-H)	0 - 95%
Operating altitude	0 - 3000 m
Non-operating altitude	0 - 15000 m
Sustainability certificates	Green Premium, RoHS
Width	480 mm
Depth	683 mm
Height	86 mm
Weight	44.3 kg
Package width	600 mm
Package depth	980 mm
Package height	254 mm
Package weight	51.7 kg
Rack mount kit	Y
Cables included	RS-232, USB cable
Quick installation guide	Y
Software CD	Y
Bundled software	Powershute Business Edition
Harmonized System (HS) code	85078000
Nominal output voltage	230 V
Nominal input voltage	230 V