Delock Converter 1 x Serial RS-232 to 1 x Serial RS-422/485 with ESD protection 15 kV surge protection 600 W and 3 kV isolation

Kods 63467

Condition: Jauns

Vairāk informācijas

This RS-232 to RS-485/422 converter by Delock is suitable for all serial devices, e.g. on machine controls, fieldbus systems, measuring instruments, printers or as RS-232 extender. The connected components are protected against surge power by the integrated protection circuits of the converter. The optical isolation suppresses interference and prevents transmission errors as much as possible. The converter is suitable for DIN rail mounting.

System requirements:
• Device with one free RS-422/485 interface
• Device with one free RS-232 interface

Specification:
• Connectors:
1 x Serial RS-232 DB9 female >
1 x RS-422/485 Terminal Block 7 pin
• Modes
2 wire RS-485 (max. 32 devices)
2 wire RS-485 (Echo Mode)
4 wire RS-422 Point to Point
4 wire Multi-Drop RS-485 and RS-422 (max. 10 devices)
• ±15 kV ESD protection on all signal pins
• 3 kV optical isolation
• Power Supply: 10 V - 30 V / 0.5 A
• Surge Protection: 600 W peak pulse
• Data transfer rate up to 921.6 Kbps
• Databits: 5, 6, 7, 8
• Stop bits: 1, 1.5, 2
• Parity: even, odd, none, mark, space
• Flow control: none, software XON / XOFF
• 3 x LED indicator
• Storage temperature: - 40 °C ~ 85 °C
• Relative humidity: 5 - 95 % (non condensing)
• Housing material: plastic
• Dimensions (LxWxH): ca. 80 x 42 x 22 mm

Package content:
• Converter
• Mounting for 35 mm DIN rail
• User manual