Description:Only for customer with Linux or Android experience.
Operating temperature: -40°C - 80°C- 800MHz Freescale ARM Cortex-A8 SoC
- Fanless operation, and robust casting construction
- Supports a wide range of operating temperatures, -40°C up to 80°C
- Ultra-compact design (150mm x 46mm x 108mm)
- Extremely low power consumption, 3.14W under typical conditions
- Multiple mounting options, wall or table and VESA mounting brackets
- Maximum space efficiency for optimized electromagnetic compatibility
- Android and Embedded Linux support
Specification:Processor: 800 MHz Freescale Cortex-A8 single core i.MX537 Memory: 1 GB DDR 3 800MHz SD Ram using 128M x 16 Flash: 4 GB onboard eMMC Flash memory Graphic: Supports two integrated graphics processing, units an OpenGL, ES 2.0 3D graphics accelerator and an OpenVG 1.1 2D graphics accelerator CRT Interface: 1 x Onboard VGA port HDMI Interface: Silicon image Sil9024A HDMI transmitter 1 x Onboard HDMI port Ethernet: Controller: SMSC Lan8720A 10/100 PHY transceiver with HP Auto-MDIX support Interface: 1 x RJ45 connector HD Audio: Controller: Freescale SGTL5000 low power stereo codec with Headphone AMP Interface: SupportsLine-in, Line-out, Mic-in connectors Serial: USB: SMSC USB 2.0 high speed 4-port hub controller, 4 x USB 2.0 ports 3 x USB connectors 1 x USB pin header supporting optional VIA 802.11n WiFi module VNT9271 COM: 1 x d-Sub 9-pin female connector CANBus: Controller: TISN65HVD1050 EMC optimized CAN transceiver Interface: 1 x D-Sub 9-pin female connector GPIO: 1 x D-Sub 9-pin female connector (GPI x4 + GPO x4) Storage interface: 4GB onboard eMMC Flash memory 1 x Onboard Micro SD connector System indicator: 1 x Red colour LED for power 1 x Green colour LED for HDD activity Watch Dog Timer: Integrated watch dog timer supporting two comparision pionts. First comparision point can interrupt ARM and second comparision point is capable of generating external interrupts onWDOG line. Front Panel I/O: 1 x Com port 1 x CANBus connector 1 x GPIO connector 3 x 3,5 phone jack 1 x HDD LED 1 x Power LED 1 x Power on/off switch 1 x DC power input connector by 2-pole phoenix connector Rear Panel I/O: 1 x HDMI port 1 x VGA port (1 x DP15) 1 x Lan 10/100 3 x USB 2.0 connectors 1 x eMMC/Micro SD boot switch Bottom opening cover: Buttom removeable door plate to access the Micro SD flash drive Input Voltage: DC 5V Power input connector: 1 x DC power input with DC jack Power consumption: Typical 3.14W Construction: Aluminium top cover Metal chassis housing Removeable left and right of wall mountable bracker VESA: Optional VESA mounting bracket 75mm x 75mm and 100mm x 100mm Dimension: 150mm (W) x 45mm (H) x 108mm (D) WiFi: Optional VIA 802.11n Wireless module VNT9271 Operating temperature: With VGA output -40°C - 80°C With HDMI output -20°C - 80°C Storage temperature: -20°C - 70°C Vibation loading during operation: With onboard eMMC 5Grms, IEC60062-2-64, random, 5-500MHz 1Oct/min, 1hr/axis Shock during operation: With onboard eMMC 50G, IEC60068-2-27, half size, 11ms duration EMC aprroved: CE, FCC, ClassA For operating system: Androit 2.3 and embedded Linux 2.6System requirements:Package content: