Description This slotbracket by Delock enables you to expand your PC by one external eSATA port. Specification • Slotbracket for installation into a PCI slot Low profile • Interfaces: 1x eSATA external 1x SATA 7pin internal • Cable length: ca. 50cm System requirement • a free SATA port on the...
This USB 3.0 Front Panel by Delock is made for installation into a free 3.5â³ or 5.25â³ bay of your computer and can be connected to two internal USB-A ports. By using the included slot bracket you can lead out the USB-A connector and make use of the USB 3.0 ports on the backside.
This Delock Hub can be installed internally into the 3.5â³ or 5.25â³ bay of your PC. The Hub expands your computer by four USB 3.0 ports. You can connect different USB 3.0 or USB 2.0 devices like adapter, MP3 player, card reader, external enclosure etc. Since the Hub will be connected to your internal PC power supply, external devices do not require any...
The USB 2.0 GPS Receiver based on u-blox 6 SuperSense® chipset has a built-in antenna for high sensitivity. You can use this GPS Receiver with a notebook and a suitable routing software for navigation.
The GPS receiver with u-blox 6 SuperSence® chipset can receive WAAS and EGNOS data besides GPS. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-604P GPS receiver can be installed onto different vehicle roofs (car, truck, bus etc.) by using the included installation material. Thus it can perfectly fit...
This adapter enables you to connect e.g. a DVI monitor through a free Displayport interface.
This adapter enables you to connect e.g. a VGA monitor through a free Displayport interface.
Description The active Displayport adapter by Delock can be used for connection of an additional DVI device e.g. a monitor to your PC. It will be powered through the USB port. This special adapter enables you to use the ATI Eyefinity technology and to connect up to three DVI displays to a 3D-accelerator of AMD Radeon HD 5000 series. Specification •...
This HDD docking station enables an external connection of a 2.5â³ or 3.5â³ SATA HDD via a USB interface. The docking cable can also be connected to your hard drive without using the holder. You can protect the hard disk on the PCB side and avoid a possible short circuit by inserting the included cover plates into the mounting holes of your 2.5â³ or...
This USB 2.0 to serial adapter enables you to connect up to eight different serial devices to a free USB port.
This USB 2.0 to HDMI adapter enables you to connect additional monitors, LCD displays or projectors to a free USB 2.0 port of your PC or notebook. Up to 6 adapters can be connected to one computer. An extra adapter is required for each monitor. The USB 2.0 adapter can mirror and extend the display and supports a resolution of up to 1920 x 1080. Thus you...
This Delock USB Extender enables you to extend the data transfer to your USB device up to 60 m. Connect the transmitter (Local) to your PC and connect an optional network cable to the transmitter. The other end of the network cable will be connected to the receiver (Remote). Afterwards you can connect your USB device.
This adapter by Delock enables you to extend a micro SD port and you can also use it as a port saver. Through the flexible cable you have the possibility to use the port for special applications like in a test laboratory.
Description This CFast adapter by Delock enables you to use SD or MMC memory cards which can be inserted into a CFast slot. The data transfer rate depends on the memory card you use. Specification • CFast type II • Supports following memory cards: Â SD, SDHC, SDXC, mini SD*, micro SD*, micro SDHC*, T-Flash*, Â MMC, MMC 4.0, RS-MMC*, RS-MMC 4.0* Â *...
This Express Card by Delock expands your notebook by one USB 3.0 port, which enables you to connect different USB 3.0 devices e.g. docking station, card reader, external enclosure etc. Since the USB-A interface is compatible to its forerunners USB 2.0 and USB 1.1, you can still use your existing USB devices. The card complies with the Express Card 34 mm...
Description This adapter by Delock enables you to convert the SATA 22 pin HDD port into a Power over eSATA port. Thus you can connect a HDD externally to your PC or notebook with eSATApd port by using a Power over eSATA cable. Therefor you do not require an additional power supply.Specification • Connector: SATA 22 pin female > eSATApd female•...
This Delock converter, with size of a 2.5 HDD, enables the connection of an mSATA module. It can be integrated to your system through an internal SATA 22 pin port. Furthermore you can install a half size mSATA module, by using the optional Delock adapter 65228.
This Delock converter can be connected to your PC or laptop via USB port and enables the connection of HDDs, SSDs and other drives with SATA 22 pin interface. The connected SATA devices use the full USB 3.0 speed, if they are SATA 6 Gb/s specified. The included power supply can be used for 3.5â³ SATA HDDs or optical drives.
This SATA converter by Delock enables you to connect a 2.5â³ SATA HDD or SSD, without using an additional power supply. The converter can be connected to two free USB ports of your PC or notebook, whereas the USB 2.0 connection can supply additional 5 V, if required. The USB 3.0 male connector can be connected to a USB 3.0 port, in order to achieve a...
The USB 2.0 to serial adapter enables you to connect 2 serial devices to a free USB port of your PC or notebook.
The USB 2.0 to serial adapter enables you to connect 4 serial devices to a free USB port of your PC or notebook.
The ultra-mini USB 2.0 Bluetooth adapter enables a wireless communication or data transfer e.g. between two PCs or a PC and a mobile phone. This Bluetooth adapter can remain plugged in your notebook since it stands out only 7 mm from the USB port of your notebook. The adapter works as dual mode dongle and does not require high power due to the Bluetooth...
This Delock converter enables you to connect a mSATA SSD in half size or full size format which can be used as a 2.5â³ HDD. The converter can be installed into your system internally through a SATA 22 pin interface.
This USB 3.0 front panel by Delock can be installed into a free 3.5â³ bay of yours computer and will be connected internally by using the included PCI Express card. It expands your system by two USB 3.0 ports on the front side and two USB 3.0 ports on the back side. Thus you can connect different USB devices like e.g. docking station, card reader,...
This USB 3.0 Front Panel by Delock is made for installation into a free 3.5â³ or 5.25â³ bay of your computer and can be connected internally to a free USB 3.0 pin header port.
This Delock USB 3.0 Hub expands your PC or notebook by four additional USB 3.0 ports as well as one USB port, which can be used as power supply for your USB devices. The Hub can be used either externally with the included power supply or internally in a 3.5â³ bay of your PC. Just connect the power cable of your PC power supply to the Hub and lead the USB...
Use this USB 3.0 to HDMI Adapter by Delock to connect additional monitors, LCD displays or projectors to a free USB 3.0 or USB 2.0 port of your PC or notebook. You can use up to 6 adapter on your computer and connect each additional monitor by one adapter. The adapter can mirror and extend the display and supports a resolution of up to 2048 x 1152. TV and...
Use this USB 3.0 to VGA Adapter by Delock to connect additional monitors, LCD displays or projectors to a free USB 3.0 or USB 2.0 port of your PC or notebook. You can use up to 6 adapter on your computer and connect each additional monitor by one adapter. The adapter can mirror and extend the display and supports a resolution of up to 2048 x 1152. TV and...
This USB charger by Navilock enables you to operate and charge up to two USB devices in your car or truck through the cigarette lighter. It supports a voltage supply of total 2100 mA for both USB ports together. Thus it provides the total 2100 mA when connecting only one USB device. Hence the voltage will be divided on both USB ports when connecting two...
The Delock USB sound adapter expands your computer by one additional sound card. Just plug the adapter to a free USB port of your laptop or PC and connect your headset or speaker to it. The audio output provides a combo interface and can be used as common analogue stereo output or as optical digital (SPDIF) output.
This Delock VGA data splitter can be used to split the video signal from video output of your PC or notebook. Thus you can connect two monitors to one VGA port. Power will be supplied through the USB port without blocking the USB port due to the male â female solution.
Expand your PC or laptop by one network interface via USB 2.0.
Use these storage boxes by Delock to stow your hard drives safely and protect it against pollution. The boxes are shaped to stack them without any problems. In order not to lose the overview you can individually inscribe the label at the front.
This Delock converter can be connected to your PC or notebook via Thunderbolt™ port and enables the connection of HDDs, SSDs and other drives with SATA 22 pin interface.
This Delock converter enables you to connect your 2.5 IDE devices e. g. HDDs to the SATA interface.
This Delock Hub can be installed into an existing cut-out of your desk and enables you to lead out the cables for monitor, keyboard and mouse. This is a practical and space saving solution which enables you to connect your USB devices easily.
This Delock Hub can be installed into an existing cut-out of your desk and enables you to lead out the cables for monitor, keyboard and mouse. This is a practical and space saving solution which enables you to connect your USB devices easily. You can easily insert your SD card into the existing slots of your Desk Hub for reading and writing.
This Delock installation frame in slim-format can be installed into a 5.25â³ SATA slim bay in order to operate a 2.5â³ SATA HDD. The included universal front panel can be used, when you install the frame into a Mini PC or if your existing front panel of your laptop does not fit.
The USB 2.0 GPS Receiver based on SiRFstarIV⢠chipset has a built-in antenna for high sensitivity. You can use this GPS Receiver with a notebook and a suitable routing software for navigation.
With this small Delock DVB-T receiver you can receive radio and TV on your PC or Mac. You only have to be in a region where DVB-T is being broadcast. The receiver is especially suitable for notebooks on the road, since no additional power supply is required.
Expand your PC or laptop by one network interface via USB 3.0.
This VGA to HDMI adapter by Delock can be used for the connection of a HDMI display to your PC or notebook. By using the stereo jack cable on the PC or notebook you can transmit the audio signal through this adapter. Furthermore this adapter will be powered via USB hence you do not need an additional power supply.
The Delock converter with the shape of 3.5â³ HDD enables the connection of a mSATA SSD over the SATA 22 pin port. With the included metal frame you can insert the converter like a 3.5â³ HDD to your system.
Expand your PC or notebook by one network interface via USB 3.0.
- Original Apple® Thunderbolt STE -> FW800 9pin F- For Mac mini, MacBookAir, MacBook Pro- Hrst.Bez. MD464ZM / A. OVP* Ordered on *
This Delock converter enables you to connect a LIF HDD through a SATA 22 pin interface to your system.
This Delock converter enables you to connect a MacBook Air SSD through a SATA 22 pin interface to your system.
The external USB 3.0 Hub expands your PC or notebook by three additional USB 3.0 ports and one network interface.
This Delock converter enables you to connect a mSATA SSD in half size or full size format which can be used as a 2.5â³ HDD. The converter can be installed into your system internally through a SATA 22 pin interface.
This Delock converter enables you to connect a mSATA SSD in half size or full size format. The converter can be connected to an internal SATA port and can be installed into a free slot of your PC.
This Delock converter enables you to connect a mSATA SSD which can be used as a 2.5â³ HDD. The converter can be installed into your system internally through a IDE 44 pin interface.
This converter by Delock enables you to convert the interface of your IDE drives into SATA or the interface of SATA drives into IDE 40 pin.
The external USB 3.0 Hub expands your PC or notebook by three additional USB 3.0 ports and one network interface.
This Delock remote control is ideal for any PC, especially used for multimedia applications. Insert the infrared receiver into a free USB port of your PC and you can control your whole computer, e.g. in the desktop area, online or in the Multimedia Center. The remote control comes with a mouse and a keyboard. Various function keys such as Web, Email,...
The Delock audio converter changes your analogue stereo signal into a digital signal. At the input port of the device you can connect two RCA cables to input in the analogue source signal e. g. from a record player. At the output port you can decide whether to transmit the signal optical via Toslink or via coaxial connection.
The Delock audio converter changes your digital signal into an analogue stereo signal. At the input port of the device you can connect e. g. your digital DVD or Blu-ray player to input the digital signal whether optical via Toslink or via coaxial connection. At the output port the analogue signal will be transmitted through the RCA connection to the...
The GPS receiver based on u-blox 6 NEO-6P module works very precise and it is ideal for positioning tasks because of the integrated PPP (Point Positioning Precision) function. PPP combined with SBAS allows high-precision applications in surveying, maritime and agriculture (precision farming). The MD6 universal connector enables the connection of optional...
The USB 2.0 GPS receiver based on u-blox 6 NEO-6P module works very precise and it is ideal for positioning tasks because of the integrated PPP (Point Positioning Precision) function. PPP combined with SBAS allows high-precision applications in surveying, maritime and agriculture (precision farming).
Description This VGA to HDMI adapter by Delock can be used for the connection of a HDMI display to your PC or laptop. The USB connector serves the audio transmission and also power supply.
This Delock adapter can be connected to your PC or notebook to a USB 3.0 interface and expands your computer by one monitor port and a Gigabit LAN interface and a USB 3.0 interface. You can connect a HDMI monitor and a VGA monitor to the adapter, but it supports only one image output at the same time, so only on the HDMI monitor will be visible.
The Delock SATA RAID converter enables you to build a RAID system with two HDDâs, as you connect the 22 pin SATA connector to the primary hard disk and connect the second hard disk to the SATA 7 pin device connector. By the second SATA 7 pin connector you embed the converter in your system.
This Delock converter enables you to connect a mSATA SSD in full size format which can be used as a 2.5â³ HDD. The converter will be connected to your system through the USB 3.0 interface, which is also compatible to USB 2.0
The Delock Backplane adapter can be connected to a SAS HDD and supports Hot Swap, Dual-Porting (Active-Active-Mode) and channel bundling with SAS HDDs. The adapter can also be used with SATA HDDs.
This Delock converter enables you to connect a mSATA SSD in half size or full size format which can be used as a 2.5â³ HDD. The converter can be installed into your system internally through an IDE 44 pin interface.
This Delock converter enables you to connect up to two mSATA SSDs in half size or full size format which can be used as a 3.5â³ HDD. The converter can be installed into your system internally through the SATA interface.
This Delock converter enables you to connect a IDE 44 Pin SSD / HDD by using the included IDE cable. You can install the converter into a free slot of your PC and connect it internally to a free SATA port.
The Delock USB 3.0 Hub is ideal for travelling as suitable e.g. for a notebook or tablet, because it requires no additional power supply. You can connect up to 4 USB devices to the hub, these 4 devices share the maximum current of 900 mA.
This Delock converter can be connected to your PC or notebook via USB port and enables the connection of HDDs, SSDs and other drives with SATA 22 pin interface. The connected SATA devices use the full USB 3.0 speed, if they are SATA 6 Gb/s specified. The included power supply can be used for 3.5â³ SATA HDDs or optical drives.
The Delock USB converter separates the electrical connection between Host-PC and USB device. The galvanic isolation avoids the disturbing noises in the audio field and inexact measuring results in the laboratory field. The compact device supports the USB 2.0 specification with Low- and Full-Speed.
This Delock converter enables you to connect a mSATA SSD which can be used as a 2.5â³ HDD. The converter can be installed into your system internally through a IDE 44 pin interface.
This adapter can be used to extract the audio signal from an HDMI transmission. While the image signal is displayed on a TV or monitor, the audio signal can be sent digital (S/PDIF) and analog (stereo) to other devices such as headphones or a surround receiver.
This Delock converter enables you to connect a mSATA SSD. The converter can be installed into your system internally through a SATA 22 pin interface or via USB.
This Delock converter enables you to connect up to two MacBook Air SSDs through the SATA interface to your system.
This adapter by Delock enables you to connect e.g. a Displayport monitor through a free HDMI interface.
This cable from Delock enables you to connect old headsets with the pin assignment L-R-MIC-GND to e.g. Apple, Nokia, Sony Ericsson and Samsung phones with the pin assignment L-R-GND-MIC.
You can use this video cable to connect various devices with a component interface. Thus, you can connect your DVD-player or camcorder to a monitor or projector with a 3.5 mm stereo jack port.
The Delock RS-232 converter separates the electrical connection between Host-PC and USB device. The galvanic isolation avoids the disturbing noises in the audio field and inexact measuring results in the laboratory field.
The Delock USB to serial converter enables you to connect a serial device to a free USB port. This USB converter separates the electrical connection between Host-PC and USB device. The galvanic isolation avoids the disturbing noises in the audio field and inexact measuring results in the laboratory field. The compact device supports the USB 2.0...
The Delock USB to serial converter enables you to connect a serial device to a free USB port. This USB converter separates the electrical connection between Host-PC and USB device. The galvanic isolation avoids the disturbing noises in the audio field and inexact measuring results in the laboratory field. The compact device supports the USB 2.0...
The Delock Ethernet to RS-232 converter by Delock enables you to integrate and control serial devices based on RS-232 via your network.
The Delock converter enables the connection of a SATA device to the IDE interface.
This Delock converter enables you to connect an mSATA module. The converter can be installed into your system internally through an SATA 7 pin interface.
This USB charger by Navilock enables you charge up to two USB devices, like cell phones, smart phones, MP3 players or iPhones / iPads, in your car or truck through the cigarette lighter. It supports a voltage supply of 3100 mA for both USB ports in total, i.e. if two USB devices are connected, the current is divided accordingly between both ports,...
This power supply by Navilock enables you to charge up to two USB devices, like cell phones, smart phones, MP3 players or iPhones / iPads, at the same time. It supports a voltage supply of 2100 mA in total. Thus the entire 2100 mA are available when connecting only one USB device, but if two USB devices are connected, the current is divided accordingly...
This adapter by Delock converts the M.2 NGFF interface into a SATA 7 pin interface. Thus you can e.g. connect SATA SSDs to the M.2 NGFF interface.
This Delock converter enables you to connect an mSATA SSD in half size format which can be used as a 1.8â³ HDD. The converter can be installed into your system internally through the SATA 16 pin interface.
This Delock converter enables you to connect an mSATA SSD in full size format which can be used as a 1.8â³ HDD. The converter can be installed into your system internally through the SATA 16 pin interface.
This Delock converter enables you to connect a M.2 NGFF SSD in 2260, 2242 and 2230 format which can be used as a 2.5â³ HDD. The converter can be installed into your system internally through an SATA 22 pin interface.
This Delock adapter can be connected to your PC or notebook via the USB 3.0 interface and you can use an additional monitor and have an additional network interface. The adapter can mirror and extend the display and supports a resolution of up to 2048 x 1152. TV and video transmission will be displayed in HD quality.
The USB 2.0 Multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a laptop and a suitable routing software for navigation.
The USB 2.0 Multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a laptop and a suitable routing software for navigation.
The MD6 serial multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a notebook and a suitable routing software for navigation. The MD6 universal connector enables the connection of optional USB or serial connecting cables.
The MD6 serial multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a notebook and a suitable routing software for navigation. The MD6 universal connector enables the connection of optional USB or serial connecting cables.
The MD6 serial multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a notebook and a suitable routing software for navigation. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-8004P GNSS receiver can be installed onto different...
The serial RS-232 multi GNSS receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS receiver with a laptop and a suitable routing software for navigation. The NL-8044P GNSS receiver can be installed onto different vehicle roofs (car, truck, bus etc.) by using the included installation material. Thus it can...
The MD6 serial multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a notebook and a suitable routing software for navigation. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-8044P GNSS receiver can be installed onto different...
The MD6 serial multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a notebook and a suitable routing software for navigation. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-8022MP GNSS receiver is especially designed for...
The MD6 serial multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a notebook and a suitable routing software for navigation. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-8222MP GNSS receiver is especially designed for...
The USB 2.0 multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a notebook and a suitable routing software for navigation. The NL-8004U GNSS receiver can be installed onto different vehicle roofs (car, truck, bus etc.) by using the included installation material. Thus it can...
The USB 2.0 multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a laptop and a suitable routing software for navigation. The NL-8022MU GNSS receiver is especially designed for installation on a white ground (boat, camper, bus etc.) It is unremarkable and fits into the vehicle...
This USB to serial adapter enables you to connect a RS-232 device to a smartphone or tablet with Android OS.
The Delock USB 3.0 Hub for laptop or tablet is your mobile companion because it requires no power supply. You can connect up to 4 USB devices to the hub, the maximum current of 900 mA is divided between the USB ports.
The Delock USB 3.0 Hub for laptop or tablet is your mobile companion because it requires no power supply. Besides to the 3 USB ports, it has a slot for SD memory cards. The maximum current of 900 mA is divided between the USB ports and the card reader.
- Original Apple® Thunderbolt ST -> Gigabit Ethernet F (1xRJ45)- For Mac mini, MacBookAir, MacBook Pro- Hrst.Bez. MD463ZM / A, OVP* Ordered on *
This Delock adapter can be connected to your PC or notebook via the USB 3.0 interface and you can use an additional monitor and have an additional network interface. The adapter can mirror and extend the display and supports a resolution of up to 2048 x 1152. TV and video transmission will be displayed in HD quality.
This Compact Flash Adapter by Delock enables you to use normal SD memory cards as well as WiFi SD memory cards for your camera with Compact Flash slot. Just insert the SD card into the adapter and then into your camera. The data transfer rate depends on the memory card you use.
This Delock converter enables you to connect a M.2 NGFF SSD in 2280, 2260, 2242 and 2230 format which can be used as a 2.5â³ HDD. The converter can be installed into your system internally through an SATA 22 pin interface.
This Delock converter enables you to connect up to two mSATA SSD which can be used as a 2.5â³ HDD. The converter can be installed into your system internally through the SATA 22 pin interface.
This adapter by Delock converts the M.2 NGFF interface into a SATA 7 pin interface. Thus you can e.g. connect SATA SSDs to the M.2 NGFF interface. By the help of the perforation you can reduce the length to 60, 42 or 30 mm.
This Delock adapter can be used as a port saver in order to prevent the M.2 NGFF interface from damage when it is under usage for high contact durability. Together with Delock item 62554 the adapter can be used for test purposes that if there is a mistake you can change fast the module.
This Delock converter enables you to connect a M.2 NGFF SSD in 2280, 2260, 2242 and 2230 format. The converter can be installed into your system internally through an SATA 22 pin interface.
This Delock converter enables you to connect a M.2 NGFF SSD in 2280, 2260, 2242 and 2230 format which can be used as a 2.5â³ HDD. The converter can be installed into your system internally through an SATA 22 pin interface.
This Delock converter enables you to connect a M.2 NGFF SSD in 2280, 2260, 2242 and 2230 format. The converter can be installed into your system internally through an SATA 7 pin interface.
This Delock converter enables you to connect up to four M.2 NGFF SSDs in 2280, 2260, 2242 and 2230 format which can be used as a 3.5â³ HDD. The converter can be installed into your system internally through an SATA 7 pin interfaces, therefor you have to connect one SATA cable with your system for each connected M.2 module.
This Delock converter enables you to connect a M.2 NGFF SSD in 2280, 2260, 2242 and 2230 format. The converter can be installed into your system internally through an SATA 22 pin interface.