8311-15
Jauns
Jautāt
Brīdinājums: Palikusis pēdējā vienība!
Availability date: 31.10.2023
Metered PDU, 16 A, 4 x IEC C19, 16 x IEC C13, Power distribution with remote monitoring capabilities in a compact design for IT network and server racks. Monitors various parameters with set thresholds and alarm tools. Various measurements allow early detection of potential failures. Precise voltage and current measurement with tolerances of +/-1% ensure reliable measurement results. Monitoring of environmental conditions (e.g. temperature and humidity) with advance warning and alarm function. Easy and fast installation in the rack Open data interface (e.g. SNMP, Modbus) for easy integration in management systems Clear local LCD display shows measured values and status of the PDU, for quick on-site analysis. Mass FW and configuration software for easy and fast installation and maintenance The Smart PDU measures the electrical parameters per phase. Adjustable threshold values with alarming increase the availability of the connected loads. An integrated display shows measured values and the status of the PDU. Additional external sensors (temperature, humidity and air pressure) can be connected to the communication interface. The PDU can be permanently installed in racks or other housing systems with corresponding receptacles. Current: 16 A Input Plug: CEE7/7 Installation: Rack 0U, Desktop Metering: PDU Metering Outlets: IEC 60320 C13, IEC 60320 C19 Phase: 1ph Power: 3,6 kVA Volts: 230 V Input monitoring: current (A) , voltage (V), energy (kWh), active, apparent and reactive power (W, VA, Var), frequency (Hz), power factor, phase angle. User defined thresholds for current per phase Extensive user-defined alarm management (remote and local) Sensor ports for connection of external sensors (temperature, humidity, air pressure) Firmware update of the PDU remotely possible User management for up to 2 users Remote connections: 10/100 Mbits Ethernet, IPv4, IPv6 Protocols: HTTP(s), SSL, STARTTLS, Telnet, TCP/IP, SNMP v1/v2/v3, DHCP, SSH, SMTP(s), NTP, Radius, Syslog, Modbus IP Encryption: TLS1.3 2 energy counters, one counter counts permanently, the other counter is resettable Input: plug Schuko CEE 7/7 1ph/N/PE 230V / 16A Output: device sockets IEC60320 16 x C13 (max. 10A per output), 6 x C19 (max. 16A per output) supply cable: cable cross section 1,5 mm², length: 3m Dimensions (mm, LxWxH): 950 x 45 x 45 Temperature range (operation / storage) : 0°C ~ 50°C / -20°C ~ 70°C Humidity range (operation / storage) : 5 - 95% RH / 5 - 95% RH (non-condensing) Maximum altitude, above sea level (operation / storage) : 0 - 3,000m / 0 - 15,000m Package content: 1 x Smart PDU 1 x Mounting bracket standard 1 x Quick Start Guide | ||||||||||||
|