Navigācija / GPS
Atrasti 147 produkti
60134
The Micro USB GPS receiver with MediaTek chipset has a built-in active antenna. Due to the Micro USB connector it is most suitable on the way for most notebooks, smartphones and tablets etc.
60323
The GNS 2000 is a small GNSS receiver. The Receiver can GPS and GLONASS signals handle and received simultaneously. Through the SBAS support and the use of up to 99 channels, it achieves a high accuracy. Routes and locations can be recorded using the logger function.
60324
The Bluetooth GNSS receiver BT-821G is using the MTK MT3333 chipset. In combination with a mobile device such as smart phone, laptop or tablet and a suitable routing software navigation is possible.
60428
This is an extremely small powerful GPS module with u-blox 6 chipset. It is characterized by fast response, high sensitivity and low power consumption.
60431
This engine module is a GNSS receiver with connector for an external GPS / GLONASS antenna.
60432
This is a complete ready to use GPS receiver.The EM-506 is a OEM Engine Board with SiRF Star IV chipset, integrated patchantenna and PPS pulse per second/LED pin.
60506
This GPS antenna by Navilock can be used with an existing GPS receiver or PNA with SMA connection. Improvement of reception will be provided by placing the antenna, e.g. on the hat rack or car roof, where it has a better or free view to the sky. The antenna is waterproof and can temporary also be used outside of the vehicle.
60508
This GPS antenna by Navilock can be used with an existing GPS receiver or car receicer with FAKRA-C connection. Improvement of reception will be provided by placing the antenna, e.g. on the hat rack or car roof, where it has a better or free view to the sky. The antenna is waterproof and can temporary also be used outside of the vehicle.
60521
This GPS antenna by Navilock can be used with an existing GPS receiver or PNA with SMA connection. Improvement of reception will be provided by placing the antenna, e.g. on the hat rack or car roof, where it has a better or free view to the sky. The antenna is waterproof and can temporary also be used outside of the vehicle.
60554
You can use this active antenna for your GNSS equipment to receive GPS and BeiDou (COMPASS) signals simultaneously.
60559
This antenna by Navilock can be used on GNSS devices to receive GPS, GLONASS and GALILEO satellite signals at the same time.
60560
This high-precision antenna by Navilock can be used on GNSS devices to receive GPS, GLONASS, GALILEO and COMPASS / BEIDOU satellite signals at the same time.
61232
The NL-65AT is recommended for use in vehicles using thermal protective vitrification. Thereby, the GPS receiver or PNA achieves higher signal strength, and thus a higher number of available satellites. Reception clearly improves by use of the NL-65AT, particularly when the GPS receiver or PNA is mounted in a location where the sky is not visible.
61264
Navilock GNSS receiver possess an MD6 universal connector. The pin assignment of this connector is identical with chipsets by u-blox, Sony, GLONASS and SiRF. In order to connect the GNSS receiver to a USB port you need this specific connecting cable. The USB connector provides power to the GNSS receiver and contains the data channels. For integration into...
61265
Navilock GNSS receiver possess an MD6 universal connector. The pin assignment of this connector is identical with chipsets by u-blox, Sony, GLONASS and SiRF. In order to connect the GNSS receiver to a serial port you need this specific connecting cable. It will be connected to the PS2 jack of your notebook, or tablet PC for power supply. The PS2 connector...
61467
The NL-64AT is recommended for use in vehicles using thermal protective vitrification. Thereby, the GPS receiver or PNA achieves higher signal strength, and thus a higher number of available satellites.
61840
The USB 2.0 GPS Receiver based on u-blox 6 SuperSense® chipset has a built-in antenna for high sensitivity. You can use this GPS Receiver with a notebook and a suitable routing software for navigation.
61842
The GPS receiver with u-blox 6 SuperSence® chipset can receive WAAS and EGNOS data besides GPS. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-604P GPS receiver can be installed onto different vehicle roofs (car, truck, bus etc.) by using the included installation material. Thus it can perfectly fit...
61994
The USB 2.0 GPS Receiver based on SiRFstarIV⢠chipset has a built-in antenna for high sensitivity. You can use this GPS Receiver with a notebook and a suitable routing software for navigation.
62447
The GPS receiver based on u-blox 6 NEO-6P module works very precise and it is ideal for positioning tasks because of the integrated PPP (Point Positioning Precision) function. PPP combined with SBAS allows high-precision applications in surveying, maritime and agriculture (precision farming). The MD6 universal connector enables the connection of optional...
62456
The USB 2.0 GPS receiver based on u-blox 6 NEO-6P module works very precise and it is ideal for positioning tasks because of the integrated PPP (Point Positioning Precision) function. PPP combined with SBAS allows high-precision applications in surveying, maritime and agriculture (precision farming).
62523
The USB 2.0 Multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a laptop and a suitable routing software for navigation.
62524
The USB 2.0 Multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a laptop and a suitable routing software for navigation.
62525
The MD6 serial multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a notebook and a suitable routing software for navigation. The MD6 universal connector enables the connection of optional USB or serial connecting cables.
62526
The MD6 serial multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a notebook and a suitable routing software for navigation. The MD6 universal connector enables the connection of optional USB or serial connecting cables.
62527
The MD6 serial multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a notebook and a suitable routing software for navigation. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-8004P GNSS receiver can be installed onto different...
625272
The serial RS-232 multi GNSS receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS receiver with a laptop and a suitable routing software for navigation. The NL-8044P GNSS receiver can be installed onto different vehicle roofs (car, truck, bus etc.) by using the included installation material. Thus it can...
62528
The MD6 serial multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a notebook and a suitable routing software for navigation. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-8044P GNSS receiver can be installed onto different...
62529
The MD6 serial multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a notebook and a suitable routing software for navigation. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-8022MP GNSS receiver is especially designed for...
62530
The MD6 serial multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a notebook and a suitable routing software for navigation. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-8222MP GNSS receiver is especially designed for...
62531
The USB 2.0 multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a notebook and a suitable routing software for navigation. The NL-8004U GNSS receiver can be installed onto different vehicle roofs (car, truck, bus etc.) by using the included installation material. Thus it can...
62532
The USB 2.0 multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a laptop and a suitable routing software for navigation. The NL-8022MU GNSS receiver is especially designed for installation on a white ground (boat, camper, bus etc.) It is unremarkable and fits into the vehicle...
62573
The USB 2.0 Multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a mobile device and a suitable routing software for navigation.
62577
The USB 2.0 Multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a mobile device and a suitable routing software for navigation.
62578
The USB 2.0 Multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a mobile device and a suitable routing software for navigation.
62579
The USB 2.0 Multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a mobile device and a suitable routing software for navigation.
62586
The 4 pin stereo jack TTL multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity.
62587
The 4 pin stereo plug TTL multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity.
62621
Navilock GNSS receiver possess an MD6 universal connector. The pin assignment of this connector is identical with chipsets by u-blox and SiRF. In order to connect the GNSS receiver to a serial port you need this specific connecting cable. It will be connected to the PS2 jack of your laptop, or tablet PC for power supply. The PS2 connector is only a power...
62665
The MD6 serial multi GNSS UDR receiver by Navilock based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The MD6 universal connector enables the...
62745
GNSS modules are fully assembled receiver with patch antenna, backup battery etc .. This version uses TTL 3.30 V. Several integrated sensors allow position determination without GNSS signals.
62755
The MD6 serial multi GNSS UDR receiver by Navilock based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The MD6 universal connector enables the...
62756
The USB 2.0 Multi GNSS UDR receiver by Navilock based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted.
62758
The USB 2.0 Multi GNSS UDR receiver by Navilock based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted.
62779
The USB 2.0 Multi GNSS UDR receiver by Navilock based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The NL-82004U GNSS receiver can be installed...
62780
The USB 2.0 Multi GNSS UDR receiver by Navilock based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The NL-82022MU GNSS receiver is especially...
62873
The USB 2.0 Multi GNSS OTG UDR receiver by Navilock based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a mobile device, a reliable position determination is also possible when the GNSS signal is interrupted.
- 1
- 2
Navigācija / GPS
- Adapteri / Konverteri
- Apgaismojums
- Automatizācijas tehnoloģijas
- Biroja / Personāla aprīkojums
- Datu nesēji / Atmiņas moduļi
- Datoru Komponentes
- Darbarīki / Mērinstrumenti
- Datu slēdži / HUB
- Kabeļi
- Audio / Video
- Apple
- Antenas IEC/F
- BNC koaksiālie
- Displayport
- DVI
- eSATA / S-SATA / ATA / IDE
- FireWire
- HDMI
- HSD Z
- Izvelkamie
- Klaviatūras
- KVM
- M8
- M12
- MC4 , DL4 Saules
- Optiskie kabeļi
- SAS
- Sakaru / Viedierīču
- SCSI
- Serial / Parallel
- STANDARD
- Strāvas kabeļi
- SFP
- Tīkla RJ45
- Tīkla instalācijas kabeļi
- Thunderbolt
- RJ 50
- ROLINE GOLD kabeļi
- USB
- VGA / SVGA
- Konektori
- Multimēdija / Perifērija
- Navigācija / GPS
- RF Radiofrekvenču tehnoloģijas
- Tīkla produkti
- 19" skapji / piederumi
- Bezvadu lokālie tīkli WLAN
- Drukas serveri
- GBIC Moduļi
- Industriālie tīkli
- Kat. 5e tīkla UTP FTP S/FTP kabeļi
- Kat. 6 / 6a tīkla UTP FTP S/FTP kabeļi
- Kat. 7 tīkla S/FTP kabeļi
- Tīkla ruļļi
- Keystone
- Komutatori un centrmezgli
- Komutācijas paneļi
- Maršrutētāji / aksesuāri
- Modēmi
- Optiskie kabeļi / adapteri
- Pārveidotāji / Raiduztvērēji / Pastiprinātāji
- PoE LAN ierīces
- Telefona kabeļi / adapteri
- Tīkla adapteri
- Tīkla konektori
- Tīkla rozetes
- UPS / Barošanas elementi
- Videonovērošanas sistēmas