Description This Delock adapter can be plugged to a DOM module and then connected to your motherboard via a ribbon cable. Specification • Adapter for connection of a DOM module to a ribbon cable • Connector: 40 pin IDE male > 40 pin IDE male Package content • Adapter 40 pin IDE Package • Delock poly bag
Description This Delock adapter can be plugged to a DOM module and then connected to your motherboard via a ribbon cable. Specification • Adapter to connect a DOM module to a ribbon cable • Connector: 44 pin IDE male > 44 pin IDE male Package content • Adapter 44 pin IDE Package• Delock poly bag
DescriptionThis adapter by Delock is made for extension of the SATA 22pin interface. Specification • Connection: SATA 22pin male > female • Dimension: 65.8mm x 33.5mm Package • Delock poly bag
Description This Power Over ESATA adapter by Delock enables you to connect USB as well as eSATA devices at the same time to one and the same port of your notebook. The Power Over eSATA connector is a special connector which combines both eSATA and USB interface. Specification • Power-over-eSATA to eSATA and USB port • Data transfer rate: eSATA up to...
This Gender Changer by Delock enables you to convert an SATA male port into a female interface.
Description The adapter enables you to connect and operate all external SATA devices, with an additional power supply, to a free USB 2.0 port to your PC or notebook. Specification • Adapter cable for data transfer • USB 2.0 specification • Connector: USB 2.0-A male > eSATA male • Only for connection of eSATA devices to USB • Chip: SunPlus SPIF225A •...
This Delock adapter enables you to connect your Slim CD/DVD drive with SATA connector via IDE 40-pin interface. Specification• Jumper for Master / Slave / Cable select adjustment • Mainboard with a free IDE 40-pin port Package content• Adapter• 2 screws
Description This connector by Delock can be soldered on your PCB. Due to the multifunctional Power Over eSATA interface, you have 3 options for connection: 1. Power Over eSATA port 2. USB port 3. eSATA port + USB port for power supply Specification • Connector: eSATAp + USB 2.0 female > 11 pin DIP type • THT PCB assembly • USB solder pins: Ã 0.6 mm •...
Description This eSATApd connector by Delock can be soldered on your PCB and enables you to connect different devices e.g. 2.5 or 3.5 HDD. The sideways goldplated connector support a voltage up to 12 V. Therefore you do not require an additional power supply. Due to the multifunctional Power Over eSATA interface, you have 3 options for connection: 1....
This Delock M.2 extension enables you to extend your M.2 module so that it can fit into a suitable slot. Through the predetermined breaking point you can get the required length. The gap on the beginning, at the fixing holes and at the end of the extension ensures the best hold for the M.2 module.
This adapter by Delock converts the M.2 key M slot into a key A slot.
This adapter by Delock converts the M.2 key M slot into a key E slot.
Description This converter by Delock enables you to use a Compact Flash card via 1,8" IDE port and thus replace a 1,8" HDD. Furthermore the CF card can be installed into your iPod by using this converter. Specification • For Compact Flash Card Typ I/II and Micro Drive • Connection via 1,8" IDE • Power via 1,8" IDE port • Master and slave setting •...
This internal Card Reader can be installed into a free slot of your PC case or without slot bracket internally as card reader board. It enables you to use a Compact Flash card via an IDE interface. The optional CF card works as additional storage space, as well as HDD for an operating system.
This Card Reader by Delock enables the application of a Compact Flash card via 40 pin IDE interface. Since this Card Reader is bootable you can also use it as HDD and install a operating system. For connecting the Card Reader you need a 3.5â³ IDE connecting cable.
This Card Reader by Delock enables the application of a Compact Flash card via 44 pin IDE interface. Since this Card Reader is bootable you can also it as HDD and install a operating system. For connecting the Card Reader you need a 2.5â³ IDE connecting cable.
This Card Reader by Delock enables the application of a Compact Flash card via 44 pin IDE interface. Since this Card Reader is bootable you can also use it as HDD and install an operating system. The Card Reader can be plugged directly and vertical to the motherboard without using an additional connecting cable.
This converter by Delock enables the connection of a Secure Digital memory card and can be connected via IDE 44pin port.