Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat.
Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat.
The USB 2.0 Multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a mobile device and a suitable routing software for navigation.
This Delock converter enables you to connect up to four M.2 NGFF SSDs in 22110, 2280, 2260, 2242 and 2230 format which can be used as a 3.5â³ HDD. The converter can be installed into your system internally through a SATA 7 pin interface, therefor you have to connect one SATA cable with your system for each connected M.2 module.
The USB 2.0 Multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a mobile device and a suitable routing software for navigation.
The USB 2.0 Multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a mobile device and a suitable routing software for navigation.
The USB 2.0 Multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a mobile device and a suitable routing software for navigation.
Use this USB 3.0 to Displayport Adapter by Delock to connect additional monitors, LCD displays or projectors to a free USB 3.0 or USB 2.0 port of your PC or notebook. You can use up to 6 adapter on your computer and connect each additional monitor by one adapter. The adapter can mirror and extend the display and supports a resolution of up to 3840 x 2160....
This USB to serial adapter enables you to connect a serial device via a USB port.
Expand your PC or notebook by two network connections via one USB 3.0 interface. Thus you can connect a second computer and with both computers you can build up a connection to a router or a switch at the same time.
To this Delock adapter you can connect a PCI Express card. The adapter will be connected to your system via the M.2 NGFF port of your system. Through the predetermined breaking point you can cut the length from 80 mm to 60 mm.
The 4 pin stereo jack TTL multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity.
The 4 pin stereo plug TTL multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity.
The Delock USB converter separates the electrical connection between Host-PC and USB device. The galvanic isolation avoids the disturbing noises in the audio field and inexact measuring results in the laboratory field. The compact device supports the USB 2.0 specification with Low- and Full-Speed.
This USB to serial adapter enables you to connect a serial device via a USB port.
This Delock converter enables you to connect up to two M.2 NGFF SSD in 2280, 2260, 2242 or 2230 format which can be used as a 2.5â³ HDD. The converter can be installed into your system internally through an SATA 22 pin interface. When using more than one SSD, you have the possibility to use different RAID level.
This Delock adapter enables you to connect an mSATA module in half size or full size format. The adapter can be installed into your system through a M.2 NGFF interface.
This Delock adapter enables you to connect a M.2 NGFF SSD in 2280, 2260, 2242 or 2230 format. The adapter can be installed into your system through an mSATA interface.
This PS/2 cable enables you to connect up to two devices to one PS/2 port.
This Delock converter enables you to connect up to two mSATA SSD which can be used as a 2.5â³ HDD. The converter can be installed into your system internally through the SATA 22 pin interface. When using more than one SSD, you have the possibility to use different RAID level.
This VGA to HDMI adapter by Delock can be used for the connection of a HDMI display to your PC or notebook. By using the stereo jack cable on the PC or notebook you can transmit the audio signal through this adapter. Furthermore this adapter will be powered via USB hence you do not need an additional power supply.
This adapter enables you to connect e.g. a DVI monitor through a free Displayport interface. The adapter supports a resolution up to Ultra HD (4K) and is backward compatible to Full-HD 1080p. The adapter offers an active conversion, thus it is also suitable for graphics cards that are not capable of outputting DP++ signals.
This adapter enables you to connect e.g. a DVI monitor through a free Displayport interface. The adapter supports a resolution up to Ultra HD (4K) and is backward compatible to Full-HD 1080p. The adapter offers an active conversion, thus it is also suitable for graphics cards that are not capable of outputting DP++ signals.
This adapter enables you to connect e.g. a DVI monitor through a free Displayport interface. The adapter supports a resolution up to Ultra HD (4K) and is backward compatible to Full-HD 1080p.
This adapter enables you to connect e.g. a DVI monitor through a free Displayport interface. The adapter supports a resolution up to Ultra HD (4K) and is backward compatible to Full-HD 1080p.
This adapter enables you to connect e.g. a DVI monitor through a free mini Displayport interface. The adapter supports a resolution up to Ultra HD (4K) and is backward compatible to Full-HD 1080p. The adapter offers an active conversion, thus it is also suitable for graphics cards that are not capable of outputting DP++ signals.
This adapter enables you to connect e.g. a DVI monitor through a free mini Displayport interface. The adapter supports a resolution up to Ultra HD (4K) and is backward compatible to Full-HD 1080p. The adapter offers an active conversion, thus it is also suitable for graphics cards that are not capable of outputting DP++ signals.
This adapter enables you to connect e.g. a DVI monitor through a free mini Displayport interface. The adapter supports a resolution up to Ultra HD (4K) and is backward compatible to Full-HD 1080p.
This adapter enables you to connect e.g. a DVI monitor through a free mini Displayport interface. The adapter supports a resolution up to Ultra HD (4K) and is backward compatible to Full-HD 1080p.
This adapter enables you to connect e.g. a HDMI monitor through a free Displayport interface. The adapter supports a resolution up to Ultra HD (4K) and is backward compatible to Full-HD 1080p. The adapter offers an active conversion, thus it is also suitable for graphics cards that are not capable of outputting DP++ signals.
This adapter enables you to connect e.g. a HDMI monitor through a free Displayport interface. The adapter supports a resolution up to Ultra HD (4K) and is backward compatible to Full-HD 1080p. The adapter offers an active conversion, thus it is also suitable for graphics cards that are not capable of outputting DP++ signals.
This adapter enables you to connect e.g. a HDMI monitor through a free Displayport interface. The adapter supports a resolution up to Ultra HD (4K) and is backward compatible to Full-HD 1080p.
This adapter enables you to connect e.g. a HDMI monitor through a free mini Displayport interface. The adapter supports a resolution up to Ultra HD (4K) and is backward compatible to Full-HD 1080p. The adapter offers an active conversion, thus it is also suitable for graphics cards that are not capable of outputting DP++ signals.
This adapter enables you to connect e.g. a HDMI monitor through a free mini Displayport interface. The adapter supports a resolution up to Ultra HD (4K) and is backward compatible to Full-HD 1080p. The adapter offers an active conversion, thus it is also suitable for graphics cards that are not capable of outputting DP++ signals.
This adapter enables you to connect e.g. a HDMI monitor through a free mini Displayport interface. The adapter supports a resolution up to Ultra HD (4K) and is backward compatible to Full-HD 1080p.
This adapter enables you to connect e.g. a HDMI monitor through a free mini Displayport interface. The adapter supports a resolution up to Ultra HD (4K) and is backward compatible to Full-HD 1080p.
This adapter by Delock converts your internal Mini SAS HD SFF-8643 interface into an external Mini SAS HD SFF-8644 interface and can be build in a PC slot.
Expand your PC or notebook by one network interface via USB 3.0. The Plug & Play function allows an easy driver installation, since it will be automatically performed, as soon as the adapter is connected to the computer.
Use this USB 3.0 to HDMI Adapter by Delock to connect additional monitors, LCD displays or projectors to a free USB 3.0 or USB 2.0 port of your PC or notebook. You can use up to 6 adapter on your computer and connect each additional monitor by one adapter. The adapter can mirror and extend the display and supports a resolution of up to 3840 x 2160. TV and...
The Delock RJ45 insulator protects a device from power surges on an attached network connection. The compact device supports Ethernet with 10/100/1000 Mb/s.
The Delock RJ45 insulator protects a device from power surges on an attached network connection. The compact device supports Ethernet with 10/100/1000 Mb/s and Power over Ethernet.
Navilock GNSS receiver possess an MD6 universal connector. The pin assignment of this connector is identical with chipsets by u-blox and SiRF. In order to connect the GNSS receiver to a serial port you need this specific connecting cable. It will be connected to the PS2 jack of your laptop, or tablet PC for power supply. The PS2 connector is only a power...
This Dual SATA RAID module offers the possibility to connect two M.2 NGFF Memory flash modules (with SATA I/O) via a free DDR3 slot to work as HDD. Here you have the option to operate with mirror function (RAID1) or with the total storage volume (RAID0). Both M.2 slots must be connected for the operation. The data shall transmitted over the SATA 6 Gb /s...
Description This mini Displayport adapter by Delock enables you to extend your system by one Displayport, HDMI and DVI interface. Thus you can connect different devices like e.g. TV, beamer, PC monitor etc. Only one monitor can be used on the adapter, not several at the same time.
This Navilock charging bar can be used for charging up to six USB devices at the same time. You can charge USB devices with high power consumption up to 2.5 A, e. g. iPad or other tablet PCs. Through the different enclosed power supply plugs you you can use the charging bar in different countries as well as in the car.
This converter by Delock enables you to connect your Compact Flash card via the Micro USB port or the USB pin header connector with your Raspberry Pi.
This converter by Delock enables you to connect a SATA device via the Micro USB port or the USB pin header connector with your Raspberry Pi.
Description This mini Displayport adapter by Delock enables you to extend your system by one VGA, HDMI and DVI interface. Thus you can connect different devices like e.g. TV, beamer, PC monitor etc. Only one monitor can be used on the adapter, not several at the same time.
Description This mini Displayport adapter by Delock enables you to extend your system by one VGA, HDMI and DVI interface. Thus you can connect different devices like e.g. TV, beamer, PC monitor etc. Only one monitor can be used on the adapter, not several at the same time.
Description This Delock adapter can be connected to your PC or laptop with Thunderbolt™ interface. Thus you have the possibility to run devices with USB type A port on the Thunderbolt™ interface.
This Delock converter enables you to connect a M.2 NGFF SSD in 2260, 2242 and 2230 format which can be used as a 1.8â³ HDD. The converter can be installed into your system internally through an SATA 16 pin interface.
This Compact Flash Adapter by Delock enables you to use normal SD memory cards as well as WiFi SD memory cards for your camera with Compact Flash slot. Just insert the SD card into the adapter and then into your camera. The data transfer rate depends on the memory card you use.
This adapter enables you to connect a Displayport monitor through a free mini Displayport interface. The adapter supports a resolution up to Ultra HD (4K) and is backward compatible to Full-HD 1080p. The screw of the mini Displayport connector secures the connection and prevents accidental unplugging of the cable.
This adapter enables you to connect e.g. a DVI monitor through a free mini Displayport interface. The adapter supports a resolution up to Ultra HD (4K) and is backward compatible to Full-HD 1080p. The adapter offers an active conversion, thus it is also suitable for graphics cards that are not capable of outputting DP++ signals. The screw of the mini...
This adapter enables you to connect e.g. a HDMI monitor through a free mini Displayport interface. The adapter supports a resolution up to Ultra HD (4K) and is backward compatible to Full-HD 1080p. The adapter offers an active conversion, thus it is also suitable for graphics cards that are not capable of outputting DP++ signals. The screw of the mini...
This adapter enables you to connect e.g. a VGA monitor through a free mini Displayport interface. The screw of the mini Displayport connector secures the connection and prevents accidental unplugging of the cable.
Expand your PC or laptop by one network interface via a USB Type-C⢠port.
This Delock converter enables you to connect one Blade-SSD (MacBook Air SSD) through the SATA interface to your system.
This converter by Delock enables you to connect you mSATA module via the Micro USB port or the USB pin header connector to your Raspberry Pi.
This converter board by Delock enables you to expand your Raspberry Pi via the Micro USB port or the USB pin header. Thus you will have two USB A ports as well as one Sub-D 9 RS-232 port and one 9 pin pin header for the second RS-232 port.
This hub by Delock enables you to expand your Raspberry Pi via the Micro USB port or the USB pin header. Thus you will have four USB A ports or two 9 pin USB pin header.
This converter by Delock enables you to connect your optical drive with Slim SATA interface via the USB interface. Therefor you can connect the converter directly to the back side of the drive.
This converter by Delock enables you to connect your drive with SATA interface via the USB interface. The converter is suitable for all SATA devices, e.g. SSD, HDD, DVD, CD-ROM.
The external USB 3.0 Hub expands your PC or laptop by three additional USB 3.0 ports and one network interface.
This Delock adapter enables you to connect a M.2 NGFF module in 2242, 2230, 3042 or 3030 format. The adapter can be installed into your system through a Mini PCIe interface. Through the predetermined breaking point you can shorten the length from full size to half size.
Description This Displayport adapter by Delock enables you to extend your system by one VGA, HDMI and DVI interface. Thus you can connect different devices like e.g. TV, beamer, PC monitor etc. Only one monitor can be used on the adapter, not several at the same time.
Description This Displayport adapter by Delock enables you to extend your system by one VGA, HDMI and DVI interface. Thus you can connect different devices like e.g. TV, beamer, PC monitor etc. Only one monitor can be used on the adapter, not several at the same time.
The MD6 serial multi GNSS UDR receiver by Navilock based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The MD6 universal connector enables the...
This VGA to HDMI adapter by Delock can be used for the connection of a HDMI display to your PC or laptop. The USB connector serves the audio transmission and also power supply.
This Delock installation frame in slim-format can be installed into a 5.25â³ SATA slim bay in order to operate a 2.5â³ SATA HDD. The included universal front panel can be used, when you install the frame into a Mini PC or if your existing front panel of your laptop does not fit.
Description This Delock converter can be connected via USB Type-C™ interface to a PC or laptop. Thus a 2.5″ SATA HDD or SSD with a 22 pin SATA interface can be used.
This Navilock USB power supply can be used to charge one USB device. With Qualcomm® Quick Charge⢠2.0 technology, supported devices can be charged up to 75% faster. This power supply adjusts the output voltage to the device being used, and thereby achieves a charging time, which is up to two thirds shorter. Other USB devices can be charged with up to...
This Navilock USB power supply can be used to charge one USB device. With Qualcomm® Quick Charge⢠2.0 technology, supported devices can be charged up to 75% faster. This power supply adjusts the output voltage to the device being used, and thereby achieves a charging time, which is up to two thirds shorter. Other USB devices can be charged with up to...
This converter by Delock enables you to connect your drive with SATA interface via the USB interface. The converter is suitable for all SATA devices, e.g. SSD, HDD, DVD, CD-ROM.
This Delock converter connects up to two mSATA SSD which can be mounted like a 2.5â³ HDD. The converter has to be installed into the system through the USB interface.
This Delock converter enables the connection of a SATA device to an IDE 44 pin interface.
This Delock converter enables the connection of a Slim SATA drive to an IDE 44 pin interface.
This Delock converter enables the connection of a M.2 NGFF SSD in 2280, 2260, 2242 and 2230 format. It can be used as a replacement for a 2.5â³ HDD. The converter will be installed into the system internally through a SATA 22 pin interface.
This Navilock charging station can be used to charge up to four devices with power at the same time. The holder supports up to two devices like smartphones or tablets to be put into the station. The LED indicator shows the accumulated amperage value of all connected devices.
This adapter can be used to extract the audio signal from an HDMI transmission. While the image signal is displayed on a TV or monitor, the audio signal can be sent digital (S/PDIF) and analog (stereo) to other devices such as headphones or a surround receiver.
This front panel by Delock can be installed into a free 3.5â³ bay of a computer. It has two USB 3.0 and two HD-Audio ports. The connecting cables will be connected internally to the motherboard.
This front panel by Delock can be installed into a free 3.5â³ bay of a computer. It has two USB 3.0 and two USB 2.0 ports. It will be connected to the motherboard internally via two pin header male ports.
This front panel by Delock can be installed into a free 3.5â³ bay of a computer. It has two USB 3.0 ports and will be connected internally via a USB 3.0 pin header male on the motherboard.
This Delock converter enables the connection of a M.2 NGFF SSD in 2280, 2260, 2242 and 2230 format. It allows the possibility to connect a PCIe or SATA M.2 SSD. The converter can be installed into your system internally through the SATA 22 pin interface while using a SATA M.2 SSD, or via the SFF-8643 interface while using a PCIe M.2 SSD.
This Delock converter enables the connection of a M.2 NGFF SSD in 2280, 2260, 2242 and 2230 format with key B and a M.2 NGFF SSD in 2280, 2260, 2242 and 2230 format with key M. It allows the possibility to connect a M.2 SSD based on PCIe and M.2 SSD based on SATA at the same time. The converter can be installed into your system internally through the SATA...
This Navilock USB car charger can be used to charge two USB devices. One USB port is equipped with Qualcomm® Quick Charge⢠3.0 technology, thereby supported devices can be charged up to 4 times faster. The second USB port provides up to 2.4 A with intelligent charging technology for conventional devices.
This Delock adapter enables the connection of a serial device via a USB Type-C⢠port.
GNSS modules are fully assembled receiver with patch antenna, backup battery etc .. This version uses TTL 3.30 V. Several integrated sensors allow position determination without GNSS signals.
This Navilock USB power supply can be used to charge one USB device.
This Navilock USB power supply can be used to charge one Micro USB device.
This M.2 module by Delock expands a system by one RJ45 Gigabit LAN port.
This M.2 module by Delock expands a system by one RJ45 Gigabit LAN port.The module and the RJ45 adapter board are designed for operation in the extendedtemperature range from -40 ° C to 85 ° C.
This M.2 module by Delock expands a system by two RJ45 Gigabit LAN ports.
This M.2 module by Delock expands a system by two RJ45 Gigabit LAN ports.The module and the RJ45 adapter board are designed for operation in the extendedtemperature range from -40°C to 85°C.
The MD6 serial multi GNSS UDR receiver by Navilock based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The MD6 universal connector enables the...
The USB 2.0 Multi GNSS UDR receiver by Navilock based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted.
The USB 2.0 Multi GNSS UDR receiver by Navilock based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted.
The USB 2.0 Multi GNSS UDR receiver by Navilock based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The NL-82004U GNSS receiver can be installed...
The USB 2.0 Multi GNSS UDR receiver by Navilock based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The NL-82022MU GNSS receiver is especially...
This Navilock USB car charger can be used to charge two USB devices. One port is equipped with a USB Type-C⢠connector, thereby supported devices can be charged with up to 3 A. The second port with a USB Type-A connector provides up to 2.4 A with intelligent charging technology for conventional devices.
The Delock A/V converter converts an analogue SCART video and audio signal to a digital HDMI signal. Thereby e.g. a VCR or game console can be connected to an HDMI monitor or Full HD TV. In addition, an HDMI input is present, so that the converter can be used as a switch. Both inputs can be scaled via the integrated video processor to an HDMI output...
This adapter by Delock can be used to extract the audio signal from an HDMI transmission. While the video signal is displayed on a TV or monitor, the audio signal can be sent digital (S/PDIF) or analogue (stereo) to other devices, such as headphones or a surround receiver.
The Delock audio converter converts an optical S/PDIF audio signal into a coaxial S/PDIF signal. A device with a TOSLINK output can be connected to a device with a coaxial digital input.
The Delock audio converter converts a coaxial S/PDIF audio signal into an optical S/PDIF signal. A device with a coaxial digital output can be connected to a device with a TOSLINK input.